Test the Leakage Switch: Press the TEST button on the leakage switch before each use to ensure it is functioning correctly.
⚠️ Warning: Ensure Proper Grounding for Safety: Before use, verify that your electrical system is properly grounded. Improper grounding can cause severe injury or death.
To check grounding:
Use a grounding tester: Plug the tester into the outlet and observe the indicator lights. Refer to the tester's manual for instructions on how to interpret the results correctly.
Or consult a licensed electrician for a professional assessment.
If properly grounded: You may use the chiller as normal.
If not properly grounded: Do not use the chiller. Turn it off and unplug it once the water reaches the desired temperature. Do not use the tub until the electrical system is correctly grounded.
Supervise Children: Ensure children are supervised at all times to prevent them from playing with the chiller.
Avoid Tilting: Do not tilt the chiller more than 45º (to prevent damage to the compressor.
Keep Air Inlet Clear: Do not cover the air inlet holes while the chiller is in operation to avoid compressor failure.
Ensure Proper Ventilation: Maintain at least 70 cm of clearance from walls to the fan to prevent hot air from being drawn back in. Do not place the chiller in small, enclosed spaces.
Complete Ozone Cycle: Allow the ozone cycle to complete before turning off the chiller.
Expect Condensation: It is normal for condensation to form and water to leak when the chiller is in heating mode.
Use Outdoors Safely: When using the chiller outdoors, place it under a rain shelter to protect it from the elements.
Always follow these guidelines to ensure the safe and effective use of your Bear Plunge system